These versatile headboards are a wonderful accessory to any  bedroom. The headboards use the same decorating concept as the cornices and tuck tables and attach directly to the wall using mounting brackets.

Measurements:

All headboards are 24" tall

Twin-39" wide

Full-54" wide

Queen-60" wide

King-76" wide

Materials needed:  Fabric & optional trim for decorating, scissors, tape measure, low temperature hot glue gun, and multi-purpose glue sticks.

Assembling the headboard:  Lay out the pieces as they will be assembled.  The frame will need to be glued together.  You will not glue the middle of the headboard to the frame.

Applying fabric:  Cut the fabric into strips.  The strips should be the width of the contour plus 1" for average weight fabrics.  Add a little more width for light fabrics and a little less for heavy fabrics.  For the length of the strip, measure from the bottom of one leg, across the entire top, & down to the bottom of the opposite leg, plus 4" for hemming.

For a gathered effect, add 3" instead of 1" to the width and double or triple the length of your fabric strip depending upon the amount of gathering you want.

For the middle of the headboard (the soft foam), you will need a single piece of fabric the width of the center foam insert plus 16" by 45". 

Work from the outside contour to the inside.  If you are gathering contours, do those last.

Start at the bottom of one side and work your way around.

Because we travel and do shows all over the country, it's not possible for us to process Shopping Cart Orders, however we will be more than happy to answer questions or take phone orders.

Visa & Master Cards Accepted. For more information or orders,
Please call Marlys @ 949-836-9496

Designed by WimberlyWeb Works